Older Version
Newer Version
StPendl
Jan 14, 2012
=Streamlining your code=
==Chapter 5 - Apply mouse selection==
//[[user:StPendl|1319905735]]//
Now we are ready to start implementing the initial request to enable color selection by clicking the color boxes instead of the radio buttons.
We only have to apply the same naming convention to the graphics boxes used to display the tolerance colors to be able to use a unified mouse event handler.
[[code format="lb"]]
graphicbox #w.Gold4 , 410, 40,30,30
graphicbox #w.Silver4, 410, 80,30,30
graphicbox #w.None4 , 410,120,30,30
[[code]]
Now we assign the mouse event handlers to all the graphics boxes, which is a piece of cake now, since we use loops to apply changes:
[[code format="lb"]]
FOR Band = 1 to 3
FOR Color = 1 to 10
Handle$ = "#w."; Colors$(Color,1); Band
#Handle$ "cls;down;fill "; Colors$(Color,2); ";flush"
#Handle$ "when leftButtonUp MouseClick"
NEXT
NEXT
FOR Tolerance = 1 to 3
Handle$ = "#w."; Tolerances$(Tolerance,1); 4
#Handle$ "cls;down;fill "; Tolerances$(Tolerance,2); ";flush"
#Handle$ "when leftButtonUp MouseClick"
NEXT
[[code]]
Finally we just need to add the initial display and the mouse event handler.
[[code format="lb"]]
' apply initial settings
call MouseClick "#w.Black1", 0, 0
call MouseClick "#w.Black2", 0, 0
call MouseClick "#w.Black3", 0, 0
call MouseClick "#w.None4", 0, 0
[none]
WAIT
[quit]
close #w
END
SUB MouseClick Handle$, PosX, PosY
RBhandle$ = Left$(Handle$, Len(Handle$)-1); "r"; Right$(Handle$, 1)
#RBhandle$ "set"
call SetBandValue RBhandle$
END SUB
[[code]]
The complete code now looks like this.
[[code format="lb"]]
'Resistor Calculator.bas
'Author: salaion Yahoo! Group
'Date: 27.11.10
'
' List of Colors at http://en.wikipedia.org/wiki/List_of_colors
'
' 27.11.10 00:18:50 - Initial as posted
' 27.11.10 00:21:40 - added array for colors and reduced redundant code for color boxes
' 27.11.10 00:34:07 - replaced duplicate command strings by variables
' 27.11.10 02:22:16 - consolidated event handler
' 27.11.10 02:39:08 - mouse selection applied
nomainwin
WindowWidth = 850:WindowHeight = 600
UpperLeftX=int( (DisplayWidth- WindowWidth) /2)
UpperLeftY=int( (DisplayHeight- WindowHeight) /2)
BackgroundColor$ = "green"
GLOBAL Band1value, Band2value, Band3value, Band4value
dim Colors$(10,2), Tolerances$(3,2)
[Colors]
DATA "Black", " 0 0 0"
DATA "Brown", "170 100 20"
DATA "Red", "255 0 0"
DATA "Orange", "255 180 0"
DATA "Yellow", "255 255 0"
DATA "Green", " 45 157 40"
DATA "Blue", " 0 0 255"
DATA "Violet", "170 0 180"
DATA "Gray", "127 127 127"
DATA "White", "255 255 255"
[Tolerances]
DATA "Gold", "212 175 55"
DATA "Silver", "200 200 250"
DATA "None", " 21 228 255"
'Fill the arrays
RESTORE [Colors]
FOR i = 1 to 10
READ ColorName$, ColorValue$
Colors$(i,1) = ColorName$
Colors$(i,2) = ColorValue$
NEXT
RESTORE [Tolerances]
FOR i = 1 to 3
READ ColorName$, ColorValue$
Tolerances$(i,1) = ColorName$
Tolerances$(i,2) = ColorValue$
NEXT
STATICTEXT #w.Ohm, "" , 500, 200, 300, 20
STATICTEXT #w.Tole,"" , 500, 230, 300, 20
STATICTEXT #w,Colors$( 1,1), 10, 42, 50, 20
STATICTEXT #w,Colors$( 2,1), 10, 82, 50, 20
STATICTEXT #w,Colors$( 3,1), 10, 122, 50, 20
STATICTEXT #w,Colors$( 4,1), 10, 162, 50, 20
STATICTEXT #w,Colors$( 5,1), 10, 202, 50, 20
STATICTEXT #w,Colors$( 6,1), 10, 242, 50, 20
STATICTEXT #w,Colors$( 7,1), 10, 282, 50, 20
STATICTEXT #w,Colors$( 8,1), 10, 322, 50, 20
STATICTEXT #w,Colors$( 9,1), 10, 362, 50, 20
STATICTEXT #w,Colors$(10,1), 10, 402, 50, 20
STATICTEXT #w,Tolerances$(1,1), 470, 42, 50, 20
STATICTEXT #w,Tolerances$(2,1), 470, 82, 50, 20
STATICTEXT #w,Tolerances$(3,1), 470, 122, 50, 20
STATICTEXT #w,"K=Kilo " , 500, 300,100, 20
STATICTEXT #w,"M=Mega " , 500, 330,100, 20
STATICTEXT #w,"Light Blue is The Default Color of Resistance " , 500, 360,400, 20
'Band1
groupbox #w.FirstDigit, "First Digit", 70,10,80,430
radiobutton #w.Blackr1 , "", SetBandValue,[none] ,75, 45,20,20'Black=0
radiobutton #w.Brownr1 , "", SetBandValue,[none] ,75, 85,20,20'Brown=1
radiobutton #w.Redr1 , "", SetBandValue,[none] ,75,125,20,20'Red=2
radiobutton #w.Oranger1 , "", SetBandValue,[none] ,75,165,20,20'Orange=3
radiobutton #w.Yellowr1 , "", SetBandValue,[none] ,75,205,20,20'Yellow=4
radiobutton #w.Greenr1 , "", SetBandValue,[none] ,75,245,20,20'Green=5
radiobutton #w.Bluer1 , "", SetBandValue,[none] ,75,285,20,20'Blue=6
radiobutton #w.Violetr1 , "", SetBandValue,[none] ,75,325,20,20'Violet=7
radiobutton #w.Grayr1 , "", SetBandValue,[none] ,75,365,20,20'Gray=8
radiobutton #w.Whiter1 , "", SetBandValue,[none] ,75,405,20,20'White=9
'Band2
groupbox #w.SecondtDigit, "Second Digit", 180,10,80,430
radiobutton #w.Blackr2 , "", SetBandValue,[none] ,185, 45,20,20'Black=0
radiobutton #w.Brownr2 , "", SetBandValue,[none] ,185, 85,20,20'Brown=1
radiobutton #w.Redr2 , "", SetBandValue,[none] ,185,125,20,20'Red=2
radiobutton #w.Oranger2 , "", SetBandValue,[none] ,185,165,20,20'Orange=3
radiobutton #w.Yellowr2 , "", SetBandValue,[none] ,185,205,20,20'Yellow=4
radiobutton #w.Greenr2 , "", SetBandValue,[none] ,185,245,20,20'Green=5
radiobutton #w.Bluer2 , "", SetBandValue,[none] ,185,285,20,20'Blue=6
radiobutton #w.Violetr2 , "", SetBandValue,[none] ,185,325,20,20'Violet=7
radiobutton #w.Grayr2 , "", SetBandValue,[none] ,185,365,20,20'Gray=8
radiobutton #w.Whiter2 , "", SetBandValue,[none] ,185,405,20,20'White=9
'Band3
groupbox #w.Multiplier, "Multiplier", 280,10,80,430
radiobutton #w.Blackr3 , "", SetBandValue,[none] ,285, 45,20,20'Black=0
radiobutton #w.Brownr3 , "", SetBandValue,[none] ,285, 85,20,20'Brown=1
radiobutton #w.Redr3 , "", SetBandValue,[none] ,285,125,20,20'Red=2
radiobutton #w.Oranger3 , "", SetBandValue,[none] ,285,165,20,20'Orange=3
radiobutton #w.Yellowr3 , "", SetBandValue,[none] ,285,205,20,20'Yellow=4
radiobutton #w.Greenr3 , "", SetBandValue,[none] ,285,245,20,20'Green=5
radiobutton #w.Bluer3 , "", SetBandValue,[none] ,285,285,20,20'Blue=6
radiobutton #w.Violetr3 , "", SetBandValue,[none] ,285,325,20,20'Violet=7
radiobutton #w.Grayr3 , "", SetBandValue,[none] ,285,365,20,20'Gray=8
radiobutton #w.Whiter3 , "", SetBandValue,[none] ,285,405,20,20'White=9
'Band4
groupbox #w.Tolerance, "Tolerance", 380,10,80,430
radiobutton #w.Goldr4 , "", SetBandValue,[none] ,385, 45,20,20'Gold=5%
radiobutton #w.Silverr4 , "", SetBandValue,[none] ,385, 85,20,20'Silver=10%
radiobutton #w.Noner4 , "", SetBandValue,[none] ,385,125,20,20'None=20%
'Fram
graphicbox #w.add, 530,60,292,30'xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
stylebits #w.add, 0,_WS_BORDER, 0,0
graphicbox #w.up, 523,53,306,7
stylebits #w.up, 0,_WS_BORDER, 0,0'
graphicbox #w.down, 523,90,306,7
stylebits #w.down, 0,_WS_BORDER, 0,0'
graphicbox #w.side1, 523,53,7,44
stylebits #w.side1, 0,_WS_BORDER, 0,0'
graphicbox #w.adds2, 822,53,7,44
stylebits #w.adds2, 0,_WS_BORDER, 0,0'
'Band1
graphicbox #w.Black1 , 100, 40,30,30
graphicbox #w.Brown1 , 100, 80,30,30
graphicbox #w.Red1 , 100,120,30,30
graphicbox #w.Orange1, 100,160,30,30
graphicbox #w.Yellow1, 100,200,30,30
graphicbox #w.Green1 , 100,240,30,30
graphicbox #w.Blue1 , 100,280,30,30
graphicbox #w.Violet1, 100,320,30,30
graphicbox #w.Gray1 , 100,360,30,30
graphicbox #w.White1 , 100,400,30,30
'Band2
graphicbox #w.Black2 , 210, 40,30,30
graphicbox #w.Brown2 , 210, 80,30,30
graphicbox #w.Red2 , 210,120,30,30
graphicbox #w.Orange2, 210,160,30,30
graphicbox #w.Yellow2, 210,200,30,30
graphicbox #w.Green2 , 210,240,30,30
graphicbox #w.Blue2 , 210,280,30,30
graphicbox #w.Violet2, 210,320,30,30
graphicbox #w.Gray2 , 210,360,30,30
graphicbox #w.White2 , 210,400,30,30
'Band3
graphicbox #w.Black3 , 310, 40,30,30
graphicbox #w.Brown3 , 310, 80,30,30
graphicbox #w.Red3 , 310,120,30,30
graphicbox #w.Orange3, 310,160,30,30
graphicbox #w.Yellow3, 310,200,30,30
graphicbox #w.Green3 , 310,240,30,30
graphicbox #w.Blue3 , 310,280,30,30
graphicbox #w.Violet3, 310,320,30,30
graphicbox #w.Gray3 , 310,360,30,30
graphicbox #w.White3 , 310,400,30,30
'Band4
graphicbox #w.Gold4 , 410, 40,30,30
graphicbox #w.Silver4, 410, 80,30,30
graphicbox #w.None4 , 410,120,30,30
'Selected Bands of Body Resistance
graphicbox #w.Band1, 155,470,15,35
graphicbox #w.Band2, 185,470,15,35
graphicbox #w.Band3, 215,470,15,35
graphicbox #w.Band4, 255,470,15,35
stylebits #w.Band1, 0,_WS_BORDER,0,0
stylebits #w.Band2, 0,_WS_BORDER,0,0
stylebits #w.Band3, 0,_WS_BORDER,0,0
stylebits #w.Band4, 0,_WS_BORDER,0,0
'General Body Resistance
graphicbox #w.37, 130,470,168,35
stylebits #w.37, 0,_WS_BORDER,0,0
'Terminal Wires
graphicbox #w.42, 80,485,50,5
graphicbox #w.43, 300,485,50,5
open "Resistor Calculator" for window_nf as #w
#w "trapclose [quit]"
#w "font Times_New_Roman 13"
#w.add "cls;down;fill yellow;font Times_New_Roman 16 bold;color red;backcolor yellow"
#w.add "place 5 20;\Resistor Color Code of 4 Bands"
#w.add "flush"
CommandString$ = "cls;down;fill blue;flush"
#w.up CommandString$
#w.down CommandString$
#w.side1 CommandString$
#w.adds2 CommandString$
FOR Band = 1 to 3
FOR Color = 1 to 10
Handle$ = "#w."; Colors$(Color,1); Band
#Handle$ "cls;down;fill "; Colors$(Color,2); ";flush"
#Handle$ "when leftButtonUp MouseClick"
NEXT
NEXT
FOR Tolerance = 1 to 3
Handle$ = "#w."; Tolerances$(Tolerance,1); 4
#Handle$ "cls;down;fill "; Tolerances$(Tolerance,2); ";flush"
#Handle$ "when leftButtonUp MouseClick"
NEXT
'Color of Terminal Wires
CommandString$ = "cls; down; fill 127 127 127;flush"
#w.42 CommandString$
#w.43 CommandString$
'General Body Resistance Color
CommandString$ = "cls; down; fill 21 228 255;flush" 'light blue
#w.37 CommandString$
#w.Band1 CommandString$
#w.Band2 CommandString$
#w.Band3 CommandString$
#w.Band4 CommandString$
' apply initial settings
call MouseClick "#w.Black1", 0, 0
call MouseClick "#w.Black2", 0, 0
call MouseClick "#w.Black3", 0, 0
call MouseClick "#w.None4", 0, 0
[none]
WAIT
[quit]
close #w
END
SUB MouseClick Handle$, PosX, PosY
RBhandle$ = Left$(Handle$, Len(Handle$)-1); "r"; Right$(Handle$, 1)
#RBhandle$ "set"
call SetBandValue RBhandle$
END SUB
SUB SetBandValue Handle$
' parse handle of calling control
Band = val(Right$(Handle$, 1))
ColorName$ = Mid$(Handle$, 4, Len(Handle$)-5)
' get position of color
FOR i = 1 to 10
if Colors$(i,1) = ColorName$ then exit for
if i < 4 then if Tolerances$(i,1) = ColorName$ then exit for
NEXT
' if we had no match exit
If i = 11 Then Exit Sub
Select Case Band
Case 1
Band1value = (i-1) * 10
Case 2
Band2value = i-1
Case 3
Band3value = 10 ^ (i-1)
Case 4
Band4value = i*5
if Band4value = 15 then Band4value = 20
Case Else
Exit Sub
End Select
Select Case Band
Case 1, 2, 3
ColorValue$ = Colors$(i,2)
Case 4
ColorValue$ = Tolerances$(i,2)
Case Else
Exit Sub
End Select
GBhandle$ = "#w.Band"; Band
#GBhandle$ "cls;down;fill "; ColorValue$; ";flush"
vv=(Band1value+Band2value)*Band3value
Select Case
Case vv>=1000000
#w.Ohm "Resistance Value=";vv/1000000;" M Ohm"
Case vv>=1000
#w.Ohm "Resistance Value=";vv/1000;" K Ohm"
Case Else
#w.Ohm "Resistance Value=";vv;" Ohm"
End Select
if Band4value>0 then #w.Tole "Tolerance Value =";" +/- ";Band4value;"%"
END SUB
[[code]]
[[StreamLineCode1|Chapter 1 - Starting the mission]]
[[StreamLineCode2|Chapter 2 - Using arrays to reduce redundant code]]
[[StreamLineCode3|Chapter 3 - Use variables for duplicate command strings]]
[[StreamLineCode4|Chapter 4 - Consolidate event handlers]]
**Chapter 5 - Apply mouse selection**
[[StreamLineCode6|Chapter 6 - Remove radio buttons]]
[[StreamLineCode7|Chapter 7 - Use a single graphics box for the resistor display]]
[[StreamLineCode8|Chapter 8 - Further reduce the amount of GUI controls (Using hot-spots)]]
[[StreamLineCode9|Chapter 9 - Adding some eye-candy]]
[[StreamLineCode10|Chapter 10 - Summary]]